Domotic functions maintenance – Delta Dore 230 CPL DRIVER User Manual
Page 8
- 15 -
- 14 -
Domotic functions
Maintenance
Nothing i
s
di
s
pl
a
yed
on the room
u
nit
s
creen.
The
s
ym
b
ol i
s
di
s
pl
a
yed.
You have ju
s
t
s
witched the unit on.
You have just switched the unit on.
There i
s
no power
s
upply
Check your circuit breaker.
An economy period interrupt
s
automatic operation.
The reduced tariff operating mode can
be modified (§ Price Programming).
Overrides are permitted.
Yo
u
c
a
nnot
a
cce
ss
the Comfort.
-1°C
a
nd Comfort -2°C
oper
a
ting mode
s
.
You have 4 order pilot wire heatin
g
or
it ha
s
been defined a
s
s
uch (
s
ee
in
s
tallation
g
uide § Allocation
of receiver
s
).
• Communication fault with the GECPL1
or GPCPL.
Check the power supply of the GECPL1
or GP4 CPL or reconfigure your units.
• Communication fault with electronic
meter.
Check the connection between the
electronic meter and the energy manager
or contact your installer.
• Communication fault with the
TYPHONE 2 CPL.
Check the power supply of the TYPHONE 2
CPL or reconfigure your units (see
installation guide, § Allocation of receivers).
Dia
g
no
s
i
s
/Solutions
The e
qu
ipment
di
s
pl
a
y
s
:
The e
qu
ipment
di
s
pl
a
y
s
:
The e
qu
ipment
di
s
pl
a
y
s
:
Override according to the alarm status
In the AUTO position only and if the function
(1)
is activated:
-
S
tarting up the control unit
fully sets the installation to
Economy mode in the 3 zones (up to the next change of pro-
gram).
-
S
hutting down the control unit
sets the installation to
Comfort mode in the 3 zones (up to the next change of pro-
gram).
The override is cancelled:
By zone:
- the next time the program switches over in the zone,
- by pressing the
,
or
button of the DRIVER CPL.
On the 3 zones:
- by changing the position of the DRIVER CPL selector.
(1)
The override function is enabled by default depending on
the status of the alarm, it can be deactivated during the radio
configuration:
From the radio screen, press the buttons
and
together
to display ON or OFF. Release.
Press or
to
select
ON or OFF.
After 2 seconds without
pressing, the screen of the DRIVER CPL returns to the radio
display, press the DRIVER CPL button
until the time
displays.
OR