Delta Dore 230 CPL DRIVER - Manual (Page 6)

- 13 - - 12 -
- TYPHONE 2 + GECPL1 :
Setting the absence mode
Before leaving the dwelling, confirm your
absence on the telephone remote control.
"tELE" is displayed.
➀ Return to normal operation
Order the termination of absence mode either remotely or
locally (on the telephone remote control).
The operation
reverts to the one shown by the knob position.
- TYPHONE 2 CPL:
Setting the absence mode
Remotely, send the absence command.
The screen of the DRIVER CPL displays the
suitcase and telephone symbols.
➀ Return to normal operation
Remotely: stop the absence order.
Locally: change the knob position, then return it to the required
position.
Domotic functions
With the TYDOM 520 radio option, up to 16 domotics pro-
ducts can be associated (door/window magnetic contacts,
telephone transmitter, alarm control unit, remote controls, etc.)
using the DRIVER CPL.
Operation with a door/window
magnetic contact
You can combine up to 16 door/window
magnetic contacts (maximum number of
domotics products that can be combined).
If one of them is opened, DRIVER CPL sets
the installation to Frost Protection mode.
Operation with a TYXIA Transmitter
For this type of operation, the DRIVER CPL
must be in automatic mode.
Pressing the button enables a comfort override with
automatic return at the next change of program.
Pressing the button enables an economy override with
automatic return at the next change of program.
The override can be cancelled by pressing a button or turning
the selector of the DRIVER CPL.
DRIVER 2 3 0 CPL can be associated with a power line carrier
telephone remote control (e.g. TYPHONE 2 CPL) or a GECPL1
whose telephone remote control input is connected to a
TYPHONE 2 to enable remote selection between the absence
mode and automatic operation.
Remote controlled absence mode
(Frost Protection)