Daktronics DakStats GameDay Graphics Generator - Manual (Page 30)

24 Football Options
Field Size (Yards)
If using the default of “100” yards, nothing must be changed. If using a different number of
yards, this value must be twice what is shown for the Center Field value in the All Sport:
1. Press
End Zone Size (Yards)
Enter the size of the end zone in yards.
Home & Guest Team Images
Click the […] button to browse to the custom image files. Select custom images for the
End Zone Image, 1st Down Ball On, 2nd Down Ball On, 3rd Down Ball On, or 4th Down Ball On
for both the Home and Guest Team.
Note: If any fields are left blank, the default image will be used. If any filenames are
invalid, no image will be drawn.
Under Home/Guest Image Position, select Center to use the full-size home/guest images or Fit
to stretch or shrink the images to the width of the field.
Background
Check Use Image to enable the use of a custom background image. Click the […] button to
browse to the custom image file. Note that if there is no background image, the Field options
Color determines how the field will appear.
Under Background Image Position, select Center to use the full-size background image or Fit to
stretch or shrink the image to the width of the field.
To-Go Image
Click the […] button to browse to the custom image file.
Sample Ball On Charts
The sample images below are shown with Center Ball On Image enabled and the Image Home
Position set to Fit.
The image shown in Figure 27 has the default ball on image and background color.
The image shown in Figure 26 has the default ball on image along with a custom background
image and a custom to go image.
Figure 26: 560x32 Chart #2
Figure 27: 560x32 Chart #1
CENTER FI ELD-SET
YARDS 50 *