Daktronics DakStats GameDay Graphics Generator - Manual (Page 16)

10 Main Application Screen
5.2 Creating New Configurations
Click the Create new configuration for [Sport] button to add a new
configuration to the Configurations list. In Figure 8 and Figure 9, Basketball
is shown as an example.
The Configurations list shows the configuration Name, chosen Sport, image Size/Type/Format, and
Last DakStats Update shows the last time the configuration was successfully updated from DakStats.
The colored icons underneath the H and G (Home and Guest) columns indicate the current status of
the configuration. These only apply to information coming from DakStats, not an All Sport console.
= Ready/Done
= Update pending
= Updating now
= Error occurred: This is most commonly caused by having an image destination folder that
does not exist, the files being read-only, or not having sufficient rights to update the files.
5.3 Renaming Configurations
1. Click the desired configuration to highlight it in blue.
2. Click the Rename selected configuration button
(Figure 10).
3. In the window that appears, type in a new descriptive
configuration name, and then click OK.
5.4 Deleting Configurations
1. Click the desired configuration to highlight it in blue.
2. Click the Delete selected configuration button (Figure 11).
3. In the window that appears, click Yes to confirm.
5.5 Configure Image Options
1. Click the desired configuration to highlight it in blue.
2. Click the Configure image options button (Figure 12).
3. The image configuration window (Figure 13) lets users
customize the following options:
Figure 8: Create New
Configuration
Figure 9: New Configuration
Figure 10: Rename
Configuration
Figure 11: Delete
Configuration
Figure 12: Configure
Image Options