Daktronics C44 User Manual
Page 42
3-14
C-44 Race Timer
Operation
Option E is used to select speed format. The user
may select either MPH or KPH.
Scoreboards
Option S is used to specify scoreboard type. The
user may select from either single line or double
line.
Option D is used to enable and disable the dual
deep stage rule in the C-44 configuration. With
this option enabled and the sure start function
on, the C-44 will indicate a foul even if the other
lane has fouled already.
Option R is used to configure the timer reset
functions.
When the auto timer reset is off, the starter cannot
reset the timer using the starter’s
console box. If it is on, the starter can
reset the timer at any time with the
starter’s console box.
The timer reset interlock function will
work only if the auto timer reset is set
to Off. When the timer reset interlock
is set to Off, the starter can activate the
tree at any time. If it is on, the starter
must wait until the timer has been reset
by the C-44 operator before starting the
tree countdown.
The printout function determines how the C-44 will work after a race is finished and
a printout is made. The user may select either:
Printout only, or
Printout reset timer move next vehicle# to current
When No Tree Handicap is off, the timer will use
the dial-ins to get a handicap and the tree will
count down using the handicap.
When No Tree Handicap is on, the timer will not
use a handicap unless True Win is set On.
Figure 22: Speed Format
Figure 23: Scoreboard Type
Figure 24: Dual Deep Stage
Figure 25: Timer Reset
Figure 26: No Tree Handicap