Daktronics C44 - Manual (Page 16)

2-2 New Track
Installation
Packaging for Return: Package and pad the item well so that it will not be damaged in
shipment. Electronic components such as printed circuit boards should either be installed in an
enclosure or should be put in an anti-static bag before boxing. Please enclose your name,
address, phone number and a clear description of symptoms.
Mail: Daktronics, Inc., Customer Service
PO Box 5128
331 32nd Avenue
Brookings, SD 57006
Phone: Daktronics Help Desk: 1-877/605-1115
or 1-605/697-4036
Customer Service Fax: 1-605-697-4444
e-mail:
[email protected]
2.3 Warranty
Daktronics has a one year warranty on all equipment. Daktronics reserves the option to
decide what damage will be covered by the warranty. All installations must use the cables (or
equivalent) specified by Daktronics. All installations must also be properly terminated and
earth grounded, per Daktronics specification. Failure to do so may void the warranty. The
owner has the responsibility of paying for shipping both to and from Daktronics. Upon
expiration of warranty Daktronics provides an optional maintenance agreement that provides
extended coverage of equipment. Questions concerning maintenance agreements may be
directed to Daktronics via the above listed address/phone number.
2.4 Parts Identification
Identify each component of the system by using the illustrations throughout this manual.
Once all parts have been identified, group the parts into logical groups for assembly. To avoid
unnecessary trips down the track, organize all the equipment into separate groups, for
instance: equipment used in the tower, all equipment for the start line, intermediate parts of
the track, and finish line. This will organize the installation procedure so that unnecessary
trips down the track are avoided.
2.5 System Diagrams
Reference Drawings:
Layout w/AC cells, start line J-box & C44 CE............................. Drawing B-91012
Field Cabling for dwg. B-91012 ................................................ Drawing B-114631
System diagrams show the complete setup for a new track. Refer to Drawings B-91012 and
B-114631 when installing the system. Your track may have some variations from this
diagram (i.e. more cable, no guard beam etc.), but basically all tracks will have this configura-
tion. On these drawings you will find conduit sizes, cable lengths and type, as well as
equipment locations for installing the system.
In addition, these diagrams can aid in removal in the off-season, emergency replacement,
maintenance, safety, and security.
The following table refers to the information in Drawing B-91012