Daktronics C44 User Manual
Page 39
C-44 Race Timer
3-11
Operation
Option F is used to change the format
of the time slips. The user has three
formats to choose from:
• Print two dual lane time slips.
• Print two single lane time slips.
• Print one dual lane time slip.
Set Scoreboard Enables
Option S is used to configure the
displays, and enable or disable the two scoreboards located at the finish line.
A particular time or value will be displayed only when a Y appears below it. Move
the highlight bar to the value that needs to be changed and press the <SPACE
BAR>. The display will alternate between Y and N. Similarly, the right and left
displays can be enabled or disabled by using the <SPACE BAR> to select On or
Off. Positioning the highlight bar under BRT and selecting [N] will cause the
displays to operate in a dimmed mode. Select [Y] to
disable the dimming effect.
Current system time and date are saved by
the C-44 when power is removed. In the
event that the operator wishes to correct
or change these settings this option may
be used to insure that all printouts have
accurate time and dates.
The Win Light timeout can be set to
either 5, 10, or 15 seconds.
Figure 12: Change Format
Figure 13: Configuration
Figure 14: Time and Date
Figure 15: Timeout