Daktronics Sportsound 500HD - Manual (Page 9)

Sound System Components 3
Section 2: Sound System Components
2.1 Equipment Overview
The Sportsound 500HD audio system consists of the following elements:
 Sound Cabinet
 Control Enclosure
 Fiber Conversion Box
 Source Equipment
 Signal Cables
Note: All products in this system are tested individually for product safety approval.
2.2 Sound Cabinet
The Sportsound 500HD sound system
cabinet (Figure 3) is 3'-0" (914 mm) high,
8'-0" (2438 mm) wide, and 3'-6" (1067
mm) deep. It is composed of a steel
skeleton sheeted in custom aluminum
paneling with two rear access doors.
The cabinet is powder coat black with a
wrinkle finish.
Grille
The grille of the cabinet consists of a woven flame resistant acoustical mesh. The mesh can be
printed in a variety of colors to display advertising, sponsors, or logo designs. The printable
area is 2'-9" (838 mm) high by 8' (2438 mm) wide.
Drivers
The number of drivers will vary based on whether the cabinet is a dual- (500HD-D) or single-
sided (500HD-SL/-SR) model. Three different types of drivers are used in the sound cabinet:
 15" (381 mm) low frequency drivers: Daktronics part # A-1903: (Figure 4)
 8" (203 mm) mid-range drivers: Daktronics part # A-2305 (Figure 5)
 1.4" (36 mm) high frequency drivers: Daktronics part # A-2302 (Figure 6)
Figure 3: Sportsound 500HD Cabinet with Grille
Figure 4: A-1903
Figure 5: A-2305
Figure 6: A-2302