Mounting instructions, Exploded rear isometric view i-beam attachment, Critical – Daktronics Sportsound 500HD User Manual

Page 46: Exploded side view unistrut attachment

.105 THICK

ENCLOSURE FLANGE

35.941

C-C

REV

DATE:

BY:

DAKTRONICS, INC.

THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON

THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY.

DO NOT REPRODUCE BY ANY MEANS WITHOUT THE

EXPRESSED WRITTEN CONSENT OF DAKTRONICS, INC.

BROOKINGS, SD 57006

DO NOT SCALE DRAWING

PROJ:

DAKTRONICS AUDIO

TITLE:

MTG DETAIL; 500HD CTRL ENCL BEAM CLAMP

DESIGN:

KSCHNABEL

DRAWN:

KSCHNABEL

DATE:

22-MAR-13

SCALE:

1/10

SHEET:

REV

JOB NO:

FUNC-TYPE-SIZE

1131068

1 OF 1

P 1561

STRUCTURAL NOTES:

ALLOWABLE LOADS PER CONNECTION:

CONTROL ENCLOSURE WEIGHT W/ MOUNTING HARDWARE: 145 LBS

BOLT TORQUE: 50 FT-LB

MIN-MAX I-BEAM FLANGE THICKNESS: .1875" - 0.75"

MOUNTING INSTRUCTIONS:

1. ATTACH UNISTRUT TO CONTROL ENCLOSURE THROUGH EXISTING HOLES IN REAR FLANGES OF CONTROL ENCLOSURE AS

SHOWN IN UNISTRUT ATTACHMENT SIDE VIEW

2. PLACE SPRING NUTS INTO UNISTRUT

3. LIFT CONTROL ENCLOSURE INTO POSITION

4. ATTACH I-BEAM CLAMPS WITH 1/2" HARDWARE AS SHOWN IN TOP AND REAR ISOMETRIC VIEW CONTROL ENCLOSURE ATTACHMENT

5. MAKE SURE THE 1/2-13 BOLTS ARE AS CLOSE TO THE I-BEAM FLANGES AS POSSIBLE

6. WHEN CONTROL ENCLOSURE IS ADJUSTED TO FINAL DESIRED POSITION, TIGHTEN BOLTS FIRMLY

NOTE:

CONTROL ENCLOSURE MUST BE MOUNTED WITHIN 50' OF THE 500HD SOUND SYSTEM FOR SIGNAL CABLE TO REACH.

REFERENCE PACKET: 0A-1561-0049

TOP VIEW

CTRL ENCL ATTACHMENT

SCALE 1/6

BACK OF CONTROL

ENCLOSURE

I-BEAM CLAMP @4

SPRING NUT @4

1/2" FLAT WASHER @4

1/2" SPLIT LOCK WASHER @4

1/2 - 13 X 3.00 BOLT @4

VERTICAL I-BEAM

EXPLODED REAR ISOMETRIC VIEW

I-BEAM ATTACHMENT

I-BEAM CLAMP @4

SPRING NUT @4

***CRITICAL***

ENSURE SPRING NUT IS TURNED

TO VERTICAL POSITION INSIDE

UNISTRUT CHANNEL

1/2" FLAT WASHER @4

1/2" SPLIT LOCK WASHER @4

1/2 - 13 X 3.00 BOLT @4

5/16" FLAT WASHER @8

5/16 - 18 X 1.000 BOLT @4

5/16" SPLIT LOCK WASHER @4

5/16 - 18 NUT @4

1-5/8" UNISTRUT @4

USE EXISTING HOLES IN ENCLOSURE

EXPLODED SIDE VIEW

UNISTRUT ATTACHMENT

1X1X1/8" THICK WASHER PLATE @4

IT IS CRITICAL THAT WASHER PLATE

IS INSERTED IN THIS LOCATION.

TYP. ALL 4 HARDWARE CONNECTIONS.