Daktronics AF-3180-64-R,A - Manual (Page 52)

Maintenance and Troubleshooting 4-14
• Replace the controller.
Sign is stuck on bright or dim.
• Check Manual/Auto dimming in Venus
1500 software.
• Check that the address on the light
detector is set to address 2
• Check light detector cable.
• Check light detector for obstructions.
• Replace the light detector.
• Replace the controller.
4.12 Initial Operation Information
Every time the display is operated, the display will run through an initialization in
which it will display the following:
1. Product Name (Galaxy®)
2. Display Size (Row x Column)
3. Shading (64 Mono)
4. Bootloader Version (OS X.XX)
5. Firmware Number (ED13305)
6. Firmware Revision (Rev X.XX)
7. Hardware Address (HW:XX)
8. Software Address (SW:XX)
9. IP Address: (172.16.192.25)
10. Subnet Msk: (255.255.0.0)
11. COM1 Configuration (C1:V15) ((Modem C1:V15) If a Modem is present)
12. Line Frequency (CLK:60 Hz)
13. Display Name Description
4.13 Replacement Parts List
The following table contains some of the items in this sign that you may need to
replace over time. Many of the parts within the sign also list their part numbers on
labels affixed to them.
To prevent theft, Daktronics recommends purchasing a lockable cabinet to store
manuals and replacement/spare parts.
Part Description Part Number
Controller 0A-1229-0005
Signal Converter-wire 0A-1127-0237
Signal Converter-Fiber 0A-1127-0239
Serial Cable; RS232 DB9F to DB25M, 6' W-1249
Modem in display 0P-1279-0003
Light Detector 0P-1247-0003
Digital Temp Sensor 0P-1247-0002
Fiber Board in Display 0P-1127-0024
422 Surge Protector 0P-1146-0031
Phone Surge Protector A-1527
Quick Connect Interface, Input 0P-1229-2001
Quick Connect Interface, Output 0P-1229-2002