Fiber interconnection, Optional temperature sensor, First time operation – Daktronics AF-3150-20-R,A User Manual
Page 38: Fiber interconnection -18, Optional temperature sensor -18, First time operation -18, 9 optional temperature sensor, 10 first time operation
Electrical Installation
3-18
Fiber Interconnection
Reference Drawings:
System Riser Diagram, Fiber ...................................... Drawing A-174344
A four-conductor fiber cable is used in connecting two or more displays in the Fiber
Interconnection method. Connect the fiber cable to the fiber cards of the display as
described in Drawing A-174344 and on the following table:
Primary - Data Out
(A34)
Field
Cabling
Secondary - Data
In (A34)
J2 Transmit (TX1)
(color varies)
J5 Receive (RX2)
J3 Receive (RX1)
(color varies)
J4 Transmit (TX2)
3.9 Optional Temperature Sensor
If you are using an optional temperature sensor with your display, see Appendix C
for mounting and signal information.
3.10 First Time Operation
When first operated, the display will run through an initialization in which it will
display the following:
1. Product Name (Galaxy®)
2. Display Size (Row x Column)
3. Shading (64 Mono)
4. Bootloader Version (OS X.XX)
5. Firmware Number (ED13305)
6. Firmware Revision (Rev X.XX)
7. Hardware Address (HW:XX)
8. Software Address (SW:XX)
9. IP Address: (172.16.192.25)
10. Subnet Msk: (255.255.0.0)
11. COM1 Configuration (C1:V15) ((Modem C1:V15) If a Modem is present)
12. Line Frequency (CLK:60 Hz)
13. Display Name Description