Daktronics AF-3150-20-R,A - Manual (Page 35)

Figure 30: Fiber Signal Connections
Signal Converter to Display Fiber Board
Signal Converter Field Cabling Display Fiber
Board
J2 Transmit (TX1) (Color varies) J5 Receive (RX2)
J3 Receive (RX1) (Color varies) J4 Transmit (TX2)
Venus
®
1500 Radio Client
Reference Drawings:
System Riser Diagram, QC Outdoor Radio, Gen 2 ..... Drawing A-185359
Schematic, Internal, W/Quick Connect ........................ Drawing B-177662
A radio-controlled display requires a Server radio connected via a J-box to the
control computer, and a Client radio at the display. The radios must be within line-
of-site of each other.
Figure 31 on the next page and Drawing A-185359 shows the layout to the Server
radio through a J-box. The Client radio is mounted near the display, and is supplied
with 25 feet of weather resistant cable. One end of the cable is pre-terminated to TB1
inside the radio enclosure, and a quick connect plug is terminated at the other end of
the cable. The quick connect cable connects to the primary display.
1. Connect the DB9M to DB9F serial cable from the computer’s serial port to
the J-box labeled “V1500 PC Connect”
2. Connect an 18 AWG, 6-conductor cable from the J-box near the computer
to the to the Server radio. The distance from the J-box to the Server cannot
Electrical Installation
3-15