D-Link DFL-600 - Manual (Page 8)

IP Address Settings and Computer Settings
In order to install the DFL-600 you will need to check your computer’s
settings and the values from your ISP.
The information offered by your ISP:
• Dynamic IP settings
• Your fixed IP address for the gateway
• Your subnet mask for the gateway
• Your default gateway IP address
• Your DNS IP address
If you would like to use PPPoE, you will need the following values from your
ISP in order to install your router:
• User Name
• Password
The static IP settings for the PC:
• Your PC’s fixed IP address
• Your PC’s subnet mask
• Your PC’s default gateway
• Your PC’s primary DNS IP address
Note: The router’s default IP address setting is 192.168.0.1, with a subnet
mask of 255.255.255.0.
Dynamic IP Settings:
It is recommended that you allow your PC’s IP settings be automatically assigned by
a DHCP server. By default, your new DFL-600 VPN Firewall functions as a DHCP
server, and it will give your PC the necessary IP settings, every time you boot your
PC.