beautypg.com

Dynamic routing – D-Link DFL-600 User Manual

Page 54

background image

Destination IP
Network

This is the IP address of the remote network that
the DFL-600 will route service requests to.

Subnet Mask

This is the corresponding subnet mask for the
remote network.

Gateway IP Address

This is the IP address of the gateway on the
remote network that will provide the connection
between your DFL-600 and servers on the
remote network.

Dynamic Routing

Your DFL-600 can automatically discover routes to destinations on both your
LAN and the WAN (Internet). You can choose either RIP1, RIP2 or None.
RIP2 (Routing Information Protocol version 2) adds support for variable-
length subnet masks, and is generally the best choice. Choosing None will
disable the routing function of your router, as will choosing Disabled for the
WAN or LAN RIP interface.