D-Link DFL-600 - Manual (Page 103)

on your LAN, or between computers on your LAN and the WAN) because
t
ia pre-d ed
intrusion method, are recor
shown below:
hey meet the criter efined at the factory as being a commonly us
ded here, in the Intrusion Detection Log, as
Intrusion Type A brief statement of the type of intrusion that
was attempted is displayed here.
Source: port Displays the source IP address and the
TCP/UDP port that the intrusion was attempted
from.
Destination: port Displays the destination IP address and the
e intrusion was attempted TCP/UDP port that th
to.
Blocking Log
Certain sessions between computer
potential to cause a disruption in the function of your com
blocked by the DFL-600’s firewall. Some of these se
by you under on the Port Filter Policy page, under
Advanced Settings tab. Events blocked (attempt
on your LAN, between computers on your LAN, or between com
s on your LAN and the WAN have the
puters and are
ssion types are defined
Policy Settings from the
s to connect to computers
puters on
your LAN and the WAN) because they met the criteria you entered on the
Port Filter Policy page, are recorded here, in the Blocking Log, as shown
below: