D-Link DFL-600 - Manual (Page 102)

Private IP: Port
our LAN that has an
This is the IP address and port number of a
computer or device on y
active NAT session.
This is the IP address and port number that
Pseudo IP: Port the
DFL-600 used to establish the LAN side of the
NAT connection
Peer IP address: Port
er or device on the WAN that has an
This is the IP address and port number of a
comput
active connection with the DFL-600
This is the transport protocol in use b
corresponding session.
gs of the various function
tatus page allows y nable or disable each of these logs using a serie
Transport y the
Status − Log Info
Your DFL-600 can keep lo s it supports. The Log
S ou to e s
of drop-down menus.
Intrusion Log
Certain sessions between computers on your LAN and the WAN have the
potential to cause a disruption in the function of your com
blocked by the DFL-600’s firewall. Some of these session types are pre-
defined by the factory, and are commonly used intrusion m
blocked (attempts to connect to computers on your LAN, between com
puters and are
ethods. Events
puters