D-Link DFL-600 User Manual

Page 79

Authentication key on both ends of a VPN
tunnel.

AH Transform

ng MD5

ou must select the exact same AH

f a VPN

This drop-down menu allows you to select the
authentication method that will be used when
AH is selected in the IPSec Operation drop-
down menu above.

You can choose between MD5

− usi

message digest authentication, and SHA

−

using the SHA authentication method.

Y
authentication method on both ends o
tunnel.

AH Auth Key (ASCII)

e predetermined alphanumeric AH

ou must select the exact same AH

Enter th
Authorization key. The length of the key wi
vary depending upon the choice of AH
Transform in the drop-down menu above

Y
Authorization key on both ends of a V
tunnel

Type

p-down menu allows you to select the

al, only the Subnet type is

pported.

This dro
type of network definition for the range of IP
addresses on the remote LAN that will be
allowed to access the VPN. At the time of the
writing of this manu
su

Starting Target Host

In this

ase, the entire subnet of IP addresses from

allowed to

This is the first IP address of a subnet range of
IP addresses of computers on the remote LA
that will be allowed to access the VPN.
c
192.168.2.1 to 192.168.2.254 will be
access the VPN.

Note that the IP addresses192.168.2.0 and
192.168.2.255 are reserved for use on the
remote network.