Daktronics Galaxy AF-3200 34 mm User Manual
Page 9
Figure 5: Back and Side Views of Typical Display
Pre-installation Checklist
Verify the following before proceeding with installation:
•
The display is in good condition after shipping and uncrating.
• All clip angles or mounting holes are attached to the support structure.
• A straight and square mounting frame is provided for the display.
Height variation in any four-foot horizontal section may not exceed ¼-
inch.
• Adequate support is provided for the display so that the structure will not
yield at any unsupported points after mounting.
• Clearance of 4" of unobstructed space above the top of the display is
allowed to remove the eyebolt.
Note: No clearance is required once the eyebolt is removed.
•
Adequate clearance is maintained in front of the display to allow the front
panel to fully open.
Clearance is maintained at the bottom to allow for airflow through the ventilation slots and in
the back to allow for the fans to exhaust air from the display interior.
2-2
Mechanical Installation