Daktronics Galaxy AF-3200 34 mm - Manual (Page 22)

Section 6: Maintenance
Important Notes:
Power must be turned off before any repair or maintenance work is done on the
display.
Qualified service personnel must make any access to internal display
electronics.
The Daktronics engineering staff must approve ANY changes made to the
display. Before altering the display, detailed drawings for the proposed
modifications must be submitted to the Daktronics engineering staff for
evaluation and approval or the warranty will be rendered null and void.
Daktronics Galaxy ® AF-3200 series 34 mm displays are front accessible, meaning that access
to the internal components is gained by opening the front panel of the display. The display
may need to be opened to perform maintenance or for troubleshooting.
The following diagram (Figure 14) shows the typical location of internal components. Note
that the location may vary slightly depending on the pixel matrix size of the display. The
"quick-connect to mirror display" will not be present in a single-face display.
Figure 14: Location of Internal Components in 16 x 64 Display
Maintenance
6-1