Section 1: introduction, 1 controllers, 2 touchpad identification – Daktronics T-7060 Touchpad User Manual
Page 7: Section 1, Introduction, Controllers, Touchpad identification
Introduction
1
Section 1:
Introduction
This manual explains the installation of Daktronics T-7000 series touchpads and provides details for
maintenance and troubleshooting. For additional information regarding the safety, installation,
operation, or service of this system, refer to the contact information listed in Section 5.
This manual is not specific to a particular installation. Project-specific information takes precedence
over any other general information found in this manual.
Please read and understand all instructions before beginning the installation process.
1.1 Controllers
Daktronics touchpads are typically used with an OmniSport
®
2000 timing system. The
OmniSport 2000 timer uses keyboard overlays (sport inserts) to control numerous sports and
scoreboard models. Refer to the following manual for operating instructions:
OmniSport 2000 Timing Console Operations Manual (ED-13312)
This control console manual is available online a
1.2 Touchpad Identification
A date (month / year) and serial number can be found stamped in the lower-right corner of
the rear of the touchpad as shown in Figure 1.
Please list the date and serial number for each touchpad in the system in the blanks provided
on the second page of this manual. When calling Daktronics customer service, please have
this information available to ensure the request is serviced as quickly as possible.
Figure 1: ID Stamp
Date
Serial #