Daktronics T-7060 Touchpad - Manual (Page 17)

Maintenance & Troubleshooting 11
4.5 Side & Bottom Vinyl Edge Cover Replacement
1. Remove any remaining tape/adhesive residue from front and back surfaces of touchpad.
Note: Stretch the tape along its length to easily remove (Figure 12).
2. Clean areas where tape was removed with 70/30 Isopropyl alcohol (Figure 13).
3. Snap a new vinyl edge cover onto the touchpad.
a. Using the vinyl edge cover as a guide, use a pencil to make a reference mark along
the entire length of the back of the touchpad (Figure 14). This will be used as a
reference for applying new tape on the back surface.
b. Remove the vinyl edge cover from the touchpad for now.
Figure 12: Removing Old Tape
Figure 13: Cleaning Edge Protector
Figure 14: Marking Touchpad