Daktronics T-7060 Touchpad - Manual (Page 10)

4 Mechanical Installation
If the pool wall has obstructions or the gutter protrudes from the wall, use spacers (PVC
board may be cut in strips) to create a stable support for the touchpad (Figure 6). Spacer size
is determined by the height and the extra depth required. Use 3M™ VHB™ Tape 5930
(Daktronics part number AT-1089 [¾"]) to adhere the spacers to the touchpad.
Ensure the spacers do not cover the drainage holes on the back of the touchpad!
Note: Daktronics does not provide these spacers.
For more information on the care and maintenance of touchpads, refer to Section 4.
Figure 6: Touchpad with Spacers