Cybex 625A Arc Trainer - Manual (Page 47)

Cybex Arc Trainer 625A/625AT Owner’s Manual
47
Membrane with Workouts key
1 2 3 4 5 6
8 10 9 11 12 7
1 Incline keys Navigates through all stored channels as in User Mode
2 Incline display Shows setting of receiver sensitivity as (n)ear or (F)ar
3 Quick Start key Selects transmitter type Resets all stored TV channels when used
4 Workouts key Toggles setup for FM presets and back to TV channel setup
5 Resistance display Shows ‘FM’ when storing FM radio station presets
6 Resistance keys Toggles the display for Adding new channels or Deleting stored
channels
7 Volume keys Increase or decrease volume
8 Display option key Scans for available TV transmitters, or will seek the next strongest
FM station or FM transmitter frequency
9 STOP key Stores and exits setup
10 Setup key When storing FM presets, this button will clear all stored FM radio
presets
Toggles near/far for receiver sensitivity
11 Enter key Enters menu, accepts value shown, moves forward in menu
12 Up/Down keys Navigates TV channels or manually tunes FM frequencies
A/V setup mode
1. Plug the optional power cord into a power outlet from a grounded circuit, See Electrical
Requirements. Coil up the remainder of the power cord and place it out of the way. The
control panel will light up and be in the Dormant Mode.
2. Hold the handrails to steady self while stepping into the foot plates.
3. Begin striding.
4. Press and hold Scan/Hold and TV Up for 3 seconds. Display will show clock icon.
5. Press Down to navigate to the “A/V” screen.