Cybex 625A Arc Trainer - Manual (Page 27)

Cybex Arc Trainer 625A/625AT Owner’s Manual
27
625AT Assembly
The words “left” and “right” denote the user’s orientation.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.
Verify correct package
1. Read box label to verify the model number and voltage (optional) match what was ordered.
2. Lift and remove cardboard sleeve surrounding unit.
3. Verify paint color matches what was ordered.
Tools Required
• Phillips screwdriver
• Stubby Phillips screwdriver
• 3/16” Allen wrench (supplied)
• 7/32” Allen wrench (2) (supplied)
• 9/16” Open end wrench (2)
Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the
equipment to ensure that there is appropriate clearance around each machine to allow for safe use
and passage.
Unpack and verify contents of carton
See content listing and diagram below for carton contents. See
Customer Service for contact
information if any parts are missing.
Item Quantity Part Number Description
1 1 Varies Base with covers attached
2 1 Varies Console assembly
3 2 12090-322 Foot pad
4 1 770A-316 Base, Accessory tray
5 1 770A-317 Cover, Top, Accessory tray
6 1 770A-318 Cover, Bottom, Accessory tray
7 1 625A-312 Cover, Rear, Top, Right
8 1 625A-313 Cover, Rear, Outer, Right
9 1 770A-324 Cover, Rear, Inner, Right
10 1 625A-310 Cover, Rear, Top, Left
11 1 770A-321 Cover, Rear, Inner, Left
12 1 625A-311 Cover, Rear, Outer, Left
13 1 NA Hardware pack
14 1 5625-4 Owner’s Manual
15 1 625AT-300 Assembly poster