Cybex 625A Arc Trainer - Manual (Page 14)

Cybex Arc Trainer 625A/625AT Owner’s Manual Cybex Arc Trainer 625A/625AT Owner’s Manual
14
Warning and Caution Decals
Read and understand all warnings and cautions listed in Safety Section before assembling unit.
CAUTION: Serious injury or damage to machine can occur. To avoid injury the following
precautions must be observed. A minimum of two people are required to lift,
move and assemble this unit. Always use proper lifting methods when moving
heavy items.
Ensure all electrical requirements are met as indicated in the specifications in the Safety Section and
as listed in this chapter.
Choosing and Preparing Site
Before assembling the unit, verify chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
Place a 3/4” (1.9 cm) thick wood base under unit to protect carpeting.
Area allows for ample access and passage clearance around unit or for emergency dismount.
Minimum clearance is 19.7 inches (0.5 meters) on at least one side of unit and also behind unit.
Minimum clearance fo 12” (30 cm) between units for proper wireless heart rate signal operation.
Electrical Power Requirements
AC Power Adapter is optional.
• Verify unit is connected to an outlet having the same configuration as the plug.
• Verify connection is a grounded circuit.
• Do not use a ground-plug adapter to adapt the 3-prong power cord to a non-grounded electrical
outlet.
• Use Cybex supplied optional AC power kit only. Consult an electrician with any questions.
• Ensure outlets used by this product meet all local and federal building codes.