beautypg.com

Cybex 625A Arc Trainer User Manual

Page 44

background image

Cybex Arc Trainer 625A/625AT Owner’s Manual

Cybex Arc Trainer 625A/625AT Owner’s Manual

44

3. Plug the USB stick into the USB port of the MCC board.

Console

USB Port

MCC Board

4. Press and hold Scan/Hold and Up

for 3 seconds.

5. Press Down

to navigate to “Cloning”. The console will display “LOAD [FILE] [ oFF ]

[USB]”. If “LOAD” is not displayed, press

Up

or

Down

to toggle setting from “SAVE”

to “LOAD”

6. Press Enter to save settings to USB stick. Console will beep four times when complete.
7. Press Pause and remove USB stick.
8. Install the back cover with four screws using a Phillips screwdriver.

See also other documents in the category Cybex Sports and recreation: