Denon DVD-1000 - Manual (Page 9)

9
ENGLISH
4 CONNECTIONS
• Read the manuals of all the components when making
connections.
• Keep the power cord unplugged until all connections have
been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power cord together with connection cords may
result in humming or noise.
NOTES:
(1) Connecting to an AV TV
• Use the included audio video cord to connect the TV’s video input connectors and audio input connectors to the DVD-1000’s video
output connectors and audio output connectors.
DVD-1000
Y C B C R
COMPONENT
VIDEO OUT
R
L
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
DIGITAL OUT
(PCM/BITSTREAM)
OPTICAL COAXIAL
VIDEO IN S-VIDEO IN
AUDIO IN
L
R
TV
S-Video output connector
The video signals are divided into color (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector, we
recommend connecting it to the DVD-1000’s S-Video
output connector using a commercially available S-Video
connection cord.
To power outlet
• Connect the DVD-1000’s video outputs to the TV either
directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder).
• Some discs contain copy prohibit signals. If such discs are
played via a VCR, the copy prohibit system may cause
disturbance in the picture.
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” comply
with your TV’s video format. When the TV is NTSC formated
set to NTSC. (See page 37)
• Set the “AUDIO OUTPUT” in “AUDIO SETUP” in “SETUP”
setting to “ANALOG”. (See page 38. Default setting is
“ANALOG”.)
NOTES: