Contemporary Control Systems EISC Configurable Switches User Manual - Manual (Page 34)

TD021000-0MB
34
[40017-40128: Port Settings port 17 – port 128 reserved]
40129: Reserved for future use
40130: Reserved for future use
40131: Reserved for future use
40132: Relay Setting1
Bit 0: Relay Active State (0- Disengaged, 1-Engaged) default = 0
Bit 1: Relay Reset Method (0 – Self-recovering, 1- Reset by user) default = 0
Bit 2: Monitoring Status (0 – Disabled, 1 – Enabled) default = 1
Bit 3: Clear Faults (1 = Clear)
Bit 4: Reset Relay (1 = Reset)
40133: Relay Activation Time after power up (in secs)
40134: Port monitor setting1 (ports 1-8): Energize relay upon matching condition
00 – Don’t care
01 – Link_Lost
10 – Link_Up
11 – Don’t care
Port8 Port7 Port6 Port5 Port4 Port3 Port2 Port1
Bit 15,14 13,12 11,10 9,8 7,6 5,4 3,2 1,0
40135: Port monitor setting2 (ports 9-16): Energize relay upon matching condition
00 – Don’t care
01 – Link_Lost
10 – Link_Up
11 – Don’t care
Port16 Port15 Port14 Port13 Port12 Port11 Port10 Port9
Bit 15,14 13,12 11,10 9,8 7,6 5,4 3,2 1,0
40136-40149: (reserved for 128 port switch)