Comtech EF Data MIDAS 4 System and Design User Manual
Page 95
![background image](https://www.manualsdir.com/files/778849/content/doc095.png)
System and Design Manual, Revision 2
Operator Functions 5–25
where:
Field
Description
CallType
Indicates if a data or video call.
CallSubType
Permanent, Scheduled, Remote, or RTS.
CallingAcct
Calling user’s account number.
CalledAcct
Called user’s account number.
CalledNo
The destination channel’s logical address.
FromNode.Channel
The originating node/channel number.
ToNode.Channel The
destination node/channel number.
StartDate
Start date of call in DD:MM:YYYY format.
StartTime
Start time of call in HH:MM:SS format.
EndDate
End date of call in DD:MM:YYYY format.
EndTime
End time of call in HH:MM:SS format.
BwRelDate
Bandwidth release date in DD:MM:YYYY format.
BwRelTime
Bandwidth release time in HH:MM:SS format.
TermCode
Reason for call termination: NORMAL, CONTROL CHANNEL CONGESTION,
NO SPACE SEGMENT AVAILABLE, FAR SIDE OFF-LINE, FAR SIDE BUSY,
UNDEFINED.
FromFEC
FEC rate of the originating traffic modem: 1/2, 2/3, 3/4, 5/6, 7/8, 8/9, 5/16, and 21/44.
FromModulation
Modulation used by originating modem: BPSK, QPSK, OQPSK, 8PSK, and 16QAM.
FromPowerLevel
Transmit power level of the originating traffic modem.
FromEbNo
Receive Eb/No of the originating traffic modem.
FromDataRate
Data Rate of the originating traffic modem in kbit/s.
FromReedSol Originating
traffic
modem used Reed-Solomon or not.
FromViSeq
Originating traffic modem used Viterbi, Sequential, or Turbo encoding.
ToFEC
FEC rate of the destination traffic modem: 1/2, 2/3, 3/4, 5/6, 7/8, 8/9, 5/16, and 21/44.
ToModulation
Modulation used by destination modem: BPSK, QPSK, OQPSK, 8PSK, 16QAM.