Dyna-Glo LP Gas Grill DGP350NP - Manual (Page 25)

LP Gas Grill
CAUTION
a. Do not store a spare LP-gas cylinder under or near this appliance.
b. Never fill the cylinder beyond 80 percent full.
c. If the information in (a) & (b) is not followed exactly,
a fire causing death or serious injury may occur.
OPERATION INSTRUCTIONS
22 23
Connecting the LP Tank
WARNING :
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE
MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INjURY.
1. The knob on the LP tank must be closed. Make sure that the knob is turned clockwise
to a full stop. The cylinder supply system must be arranged for vapor withdrawal.
2. Check that the control knob on the control unit is turned off.
3. Remove the protective cap from the LP tank valve and coupling nut.
4. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the
nipple is centered in the valve outlet. The coupling nut connects to the large outside
threads on the valve outlet. Use care – do not cross thread the connection.
5. Hand-tighten the coupling nut clockwise until it comes to a full stop.
Firmly tighten by hand only. Do not use tools.
WARNING
In the connection process,
make sure:
 the regulator inlet connector
mates with the cylinder valve
outlet properly, safely and firmly,
and;
 the LP-Gas hose does not come
in contact or remain in contact
with the firebox.
Straight