Dyna-Glo LP Gas Grill DGP350NP - Manual (Page 17)

14 15
ASSEMBLY INSTRUCTIONS
Step 12
Install the collapsible
shelf support A (14) and
collapsible shelf support B
(15) on both sides of the
grill body using hardware
part E (M5x12 screw).
Step 13
E
M5x12
Scr ew
Hardware Used
16 pc
Open the lid and place the two heat tents (16) on the brackets
directly above the burners on the inside the grill body.
14 15 12
E
15: Collapsible
Shelf Support B
Qty: 2 pcs
A B
Collapsible
Shelf Support
14 15
16
LP Gas Grill
WARNING: IT IS VERY IMPORTANT TO CHECK AND
ENSURE THAT EACH AND EVERY BURNER IS FULLY ENGAGED
WITH THE ADjACENT VALVE ORIFICE BEFORE COMPLETING STEP 13.
FAILURE TO DO SO MAY RESULT IN FIRE OR ExPLOSION, POSSIBLY
CAUSING SERIOUS INjURY OR DEATH. REFER TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK THE ENGAGEMENT.