Comtech EF Data DMD1050 - Manual (Page 43)

DMD1050 Satellite Modem Board Theory of Operation
MN-DMD1050 3–17
Revision 9
3.10 DMD1050 Clocking Options
The DMD1050 supports a number of different clocking options that can be recovered from the
satellite or the terrestrial links. The various clocking options allow users to determine which
clock will best fit their applications. Figure 3-9 gives an overview on how the modem processes
the various clocks for the Tx Clock source and the Rx Buffer Clock source. Tx and Rx Clocks
may be independently locked.
SD
TT
Tx CLK
SRC
High Stability
Oscillator
ST
CLOCK &
DATA
EXT REF
EXTERNAL
INTERNAL
SCT CLK
SRC
REF FREQ
SRC
SCT
SCTE
TRANSMIT
RECEIVE
CLOCK & DATA
RECOVERY
SCT
SCTE
RX SAT
RT
RD
SCR
BUFFER CLK
SRC
DMD1050 CLOCKING AND POLARITY
MODULATION
HIGH STABILITY
DEMODULATION
CLK POL
DATA POLARITY
NORMAL
INVERTED
AUTO
INV. TERR&BASE
INVERT NONE
INV. BASEBAND
INV. TERR DATA
DATA POLARITY
BUFFER CLK POL
NORMAL
INVERTED
INV. TERR&BASE
INVERT NONE
INV. BASEBAND
INV. TERR DATA
Figure 3-9. Clocking and Polarity Diagram
3.10.1 TX Clock Options
TX clock options can be recovered from the terrestrial interface, satellite interface or internally
generated. The allows users to select SCTE Clock (Terrestrial) or the SCT internal clock. The
modem also allows user to recover the SCT Clock from the satellite (SCR) or from the modem
internally. The modem allows users to select clock polarity. The Tx clock selections available
are: