Comtech EF Data DMD1050 - Manual (Page 136)

DMD1050 Satellite Modem Board Web Browser
MN-DMD1050 7–42
Revision 9
+3.3V Supply {Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +3.3 Volt power bus
located inside the modem.
+5V Supply {Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +5 Volt power bus located
inside the modem.
+12V Supply {Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +12 Volt power bus located
inside the modem.
+24V Supply {Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +24 Volt power bus located
inside the modem.
RESET LATCHED ALARMS Clicking on this button will reset (Clear) all Latched
Alarms
Alarms / Backwards Menu
Figure 7-25. Alarms / Backwards Menu
IDR ALARMS
IDR Backwards #1
SAT Alarm: {Pass/Fail, Unmasked/Masked}
IBS and IDR Backward Alarms are only available via User Interface i.e.
Web Browser, SNMP, Terminal Screens and RLLP. There are no physical
contacts available for the backward alarms.
IMPORTANT