Compuprint 6314 - Manual (Page 73)

Compuprint 6314/6414 - User Manual
INTERFACES
Standard Parallel
Serial RS232 (9 pin plug DB connector)
USB
Optional Ethernet 1/100 Base T
Table 10 – Interfaces
EMULATIONS
Standard CZL (Zebra)
CDL (Datamax)
CPL
Table 11 – Emulations
LABEL SPECIFICATIONS
Diameter of roll 38,1 mm. (1,5 inch) or 76,2 mm. (3 inch)
Width Max. 118 mm.
Height of gap/black tick Min. 1,27 mm.
Size of hole Min. 1,27 mm. – Max. 25,4 mm.
Maximum thickness 0,127 mm.
Internal label rewinder capacity Max. Diameter:
81 mm. (3.2 inch) (Half Rewinder)
Recommended materials for labels Thermal transfer:
− Premium Coated Paper, permanent acrylic
adhesive
− Premium Coated Paper, removable adhesive
− 7,0 mil coated paper tag-stock
− 4,0 mil white polyolefin, permanent acrylic
adhesive
− Smudge-proof white polyolefin, permanent acrylic
adhesive
− 8,5 mil smudge-proof poly tag-stock
− 2,0 mil polyster label-stock, white, bright and
matte chrome
− Direct thermal
− Ecomomy direct thermal paper, permanent acrylic
adhesive
− Premium direct thermal paper, permanent acrylic
adhesive
− IR scannable direct thermal paper, permanent
acrylic adhesive
− 7 mil direct thermal paper tag-stock
− 3,3 mil direct thermal film, permanent acrylic
adhesive
Sizes Roll or continuous form (with or without slots), labels,
cards, transparents
Table 12 – Label specifications
73