Compuprint 6314 - Manual (Page 26)

Compuprint 6314/6414 - User Manual
2.3.2 Label Peel Off (Optional)
The printer can be set up to automatically peel labels off the backing liner and dispense them one at
a time while rewinding the liner. This configuration requires routing the liner through the rollers on
the Peel/Tear assembly and the use of the printer’s internal rewinder.
- Open the media cover.
- Remove the tear bar assembly.
- To install the label peel-off system, remove the two screws on the back of the tear bar assembly
and tear blade by rotating the tear off plate. Replace the cutting blade with the peel-off system.
Fig. 19 – Removing the cutting blade
- Thread the liner over the peel bar and then through the slot of the front plate just below the
platen roller and into the printer.
26