Ip assignment, Ip address, Subnet mask – Compuprint 6314 User Manual
Page 68: Gateway address, Host name, Workgroup name, Enabling smtp, 1 ip assignment, 2 ip address, 3 subnet mask
Compuprint 6314/6414 - User Manual
3.12.1 IP Assignment
IP address assignment mode.
- FIXED*: Assigns the static or fixed IP address.
- DHCP: Assigns the dynamic IP address (DHCP protocol).
- ARP: Assigns the user’s defined IP address (ARP protocol).
3.12.2 IP Address
These values set the INIT IP address. The IP address is represented by a decimal notation where the
decimal values are divided by points in four fields. Each field ranges between 0 and 255. Use the
Scroll function key to increase the values in one field and the Enter function key to move to the
next field. The default value is 127.000.000.000.
3.12.3 Subnet Mask
These values set the INIT net mask address. This number is represented by a decimal notation
where the decimal values are divided by points in four fields. Each field ranges between 0 and 255.
Use the Scroll function key to increase the values in one field and the Enter function key to move
to the next field. The default value is 255.255.254.000.
3.12.4 Gateway Address
These values set the ID default gateway number. This number is represented by a decimal notation
where the decimal values are divided by points in four fields. Each field ranges between 0 and 255.
Use the Scroll function key to increase the values in one field and the Enter function key to move
to the next field.
3.12.5 Host Name
The host is identified by a name. This function allows to create the name of the host using a 14-
character string. Use the Scroll function key to increase the values in one field and the Enter
function key to move to the next field.
3.12.6 Workgroup Name
The workgroup is identified by a name. This function allows to create the name of the workgroup
using a 14-character string. Use the Scroll function key to increase the values in one field and the
Enter function key to move to the next field.
3.12.7 Enabling SMTP
- DISABLE*: disables the SMTP (Simple Mail Transfer Protocol) service, that is disables the
reception/transfer/error service of the e-mail.
- ENABLE: enables the SMTP (Simple Mail Transfer Protocol) service, that is enables the
reception/transfer/error service of the e-mail.
68