Care Fitness 50733 Computer - Manual (Page 11)

incline according to HRC target automatically.
2) If you do not set the Time, the Time window will count-up, otherwise it shows the count-down,
the system will stop the treadmill automatically to enter to the Standby status after count-down.
3) During the training, if the Pulse-Measure function fails, the Pulse window will show ‘Er’,
treadmill will slow down until it stops.
Customized program setting:
The users can preset the speed, time and record them in the computer for future use, according to their own
needs. There are 5 sets of user settings and 16 programs per set in this computer.
1) Customized program setting: Press “User set” button in ready status for custom program setting, the
light will be on for user setting 1.
Press UP/DOWN button to choose programs; press “ENTER” to start time setting.
2) TIME SETTING
Before this section of program is set, the initial time is 16 minutes. Otherwise it shows set time. Press
UP/DOWN button to change program running time (The scale is 10-59 minutes.), press ENTER to start
speed and incline setting of section.
3) Speed and incline setting
a. The dot matrix of section 1 in the LCD starts to twinkle, meaning it’s OK to start setting. If this program is
unidentified, the initial speed is 1KM/H; the initial incline is 0. Otherwise it shows set speed and incline.
Press UP/DOWN button to choose the speed you want.
Press UP/DOWN button to choose the incline you want.
Press ENTER after setting, and start next section speed and incline setting.
b. Do the same to set the speed and incline of section 2-16. When the last section is finished identified and
you continued setting by pressing ENTER, the computer will beep twice to remind you the setting is done.
c. During setting, press STOP to exit.
d. Press “user set” to record the data to the computer. The dot matrix shows all speed data; time window
shows total time; incline window shows section one incline data.
e. If you want to delete all customized program setting data, long press “user set”.
f. If all data are preserved, press START to operate these set programs. Press “user set” to back to ready
status.
Customized Program Operation
Press “CUSTOM” under ready status, the LCD will show Program 1. Press “CUSTOM” continuously,
the LCD will show 2-5. If press “CUSTOM” again, it will go back to ready status.
If the custom program is set, the LCD will show the data of the program.
Press “START/STOP” to operate program. If the program is not set, it will go back to ready status.
Body fat operation
a. Press “Body Fat” in ready status.
b. Under “Body Fat” status, the LCD shows “MAN” or last set gender. choose: “MAN”, “WOMAN”,
Press “ENTER” to set weight.
c. Weight (25-200KG), The LCD will twinkle and show 45 (KG) or last set weight, press UP/DOWN
button to choose your weight. Press “ENTER” to set height.
d. Height (100-220CM), The LCD will twinkle and show 145 (CM) or last set height, press UP/DOWN
button to choose your Height. Press “ENTER” to set age.
e. Age (8-65), The LCD will twinkle and show 18 or last set age, press UP/DOWN button to choose
your age. Press “ENTER” to set body fat test.
f. After all setting, The LCD will twinkle and then hold both of your hands on the hand pulse to test
your body fat. The LCD will show your body fat when test is finished, or it will show “-----” if it’s
failed. The computer will choose the appropriate program for you after processing the data. You
can press “Body Fat” to quit the test during operation and return to ready status.
g. Press “START/STOP” to enter program status. The time starts to count down. When changing
different programs, it will produce beep sound. When the time descends to zero, the speed slows
down and the treadmill stop.
h. Taking Asian measure: body fat under 19 is thin; between 19 and 24 is realistic weight; between 24
and 27 is overweight; over 27 is obese.