2 to set the tcp/ip properties for the pc – Cadac Seance User Manual
Page 23
PC Setup
2-13
Revision SE2005-2
Séance Interface 7975
51915
7R#VHW#WKH#7&32,3#SURSHUWLHV#IRU#WKH#3&=
1.
Click TCP/IP in the Network settings dialogue, see
2.
Click the Properties button to open the TCP/IP Properties dialogue as shown in
.
3.
Click Specify an address
4.
Enter the IP address into the IP address field (194.222.33.11 for PC1 and
194.222.33.12 for PC2).
5.
Enter 255.255.255.0 into the Subnet mask field
6.
Click on the WINS configuration
7.
Click Disable WINS configuration
8.
Click on the DNS configuration
9.
Click Disable DNS configuration
WARNING:
Do not add leading zeros into the IP address and Subnet mask fields (i.e. input
194.222.33.11 not 194.222.033.011). If this is not observed, the computer will not
communicate.
FIG 2-21. TCP/IP properties dialogue
194 . 222. 33 . 11