Cadac Seance - Manual (Page 18)

2-8 PC Setup
Séance Interface 7975 Revision SE2005-2
Select the adapter from the list (or use a disk supplied by the adapter’s manufacturer)
and click OK.
Click the Protocols tab. If TCP/IP protocols is not present click the Add button to dis-
play the add protocols page shown in
fig 2-16 .
Click on TCP/IP protocol followed by OK.
FIG 2-14. NT network adapter dialogue
6HOHFW#DGDSWHU &OLFN#2.
FIG 2-15. NT network protocols
&OLFN#3URWRFROV
&OLFN#7&32,3
SURWRFROV
&OLFN#$GG#WR#DGG#SURWRFRO &OLFN#2.