Cadac Seance - Manual (Page 22)

2-12 PC Setup
Séance Interface 7975 Revision SE2005-2
519 ,QVWDOOLQJ#7&32,3#SURWRFRO#LQ#:LQGRZV#<82<;
1. Click the Add button in the network dialogue. This brings up the Select Network
component type dialogue as shown in
fig 2-20 .
2. Click Protocol, see fig 2-20 .
3. Click Add to display the Select Network Protocol dialogue as shown in
4. Click Microsoft.
5. Double click TCP/IP.
51914 6HWWLQJ#XS#7&32,3
An IP address needs to be allocated to each node on the network. CADAC suggests
using 194.222.33.11 for PC1 and 194.222.33.12 for PC2.
FIG 2-20. Select Network protocols dia-
logue
&OLFN#0LFURVRIW 'RXEOH0FOLFN#7&32,3