Xplug control installation, Installation to web server – D-Link DCS-1000 User Manual
Page 75
74
Xplug Control Installation
Installation To Web Server
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select “System” and under the
“Loading ActiveX From” input web server location
(http://www.web server location.com/).
Once the settings are completed the user now is able to access the Internet
Camera from the web browser by selecting the image view – ActiveX mode.
Note:
Set your browser security level to “Low”.
Important Information
It is highly recommended to install the Xplug Control application to the
Web Server for IE 5.0. It must be installed to a Public Domain with
Fixed IP address.