D-Link DCS-1000 User Manual
Page 25
24
•
SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-
mail messages between servers you need to input the mail server
address in this field.
•
Sender e-mail is the person’s e-mail address whom will be sending
the e-mail.
•
Receiver e-mail is the e-mail address of the person whom will receive
the e-mail.
•
Sending Interval is the period of time between each e-mail being sent
to the receiver. If the setting is at 10 seconds, a new e-mail will be
sent in 10 seconds interval to the receiver.
•
Sending Time is the number of times the e-mail will be sent to the
receiver before it terminates.
Select “Trigger I/O Output” and enter the setting for the duration of the
output device for Output 1 time and Output 2 time in seconds.
I/O Input 2 Trigger:
Select “Send e-mail attached with image” and enter the relevant information
such as the SMPT Server Address, Sender e-mail Address, Receiver e-mail
Address, Sending Interval and Sending Times.
•
SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-
mail messages between servers you need to input the mail server
address in this field.
•
Sender e-mail is the person’s e-mail address whom will be sending
the e-mail.
•
Receiver e-mail is the e-mail address of the person whom will receive
the e-mail.
•
Sending Interval is the period of time between each e-mail being sent
to the receiver. If the setting is at 10 seconds, a new e-mail will be
sent in 10 seconds interval to the receiver.
•
Sending Time is the number of times the e-mail will be sent to the
receiver before it terminates.
Select “Trigger I/O Output” and enter the setting for the duration of the
output device for Output 1 time and Output 2 time in seconds.
Save/Cancel:
After making sure all settings in the System are correct, click on the “Save”
icon to store the settings for the DCS-1000. You can alternatively click on the