D-Link DCS-1000 - Manual (Page 30)

29
View Image – Java Mode
Click on “View Image – Java Mode” from the Home screen to access the
video images from the Internet Explorer or Netscape browser as illustrated
below:
Camera Name* - The Camera name will be display when the Camera Name
field is entered in the Web Configuration setting under “System”
Location** - The location of DCS-1000W will be displayed when the
Location field is entered in the Web Configuration settings under “System”.
In the View Image – Java Mode you are allowed two output triggers. Just
click on the desired selection “ON” or “OFF” to utilize the options for each
of the output triggers (Output 1 trigger or Output 2 trigger).
Note 1:
Output trigger will send a 5V signal to the device connected to DCS-1000. A
maximum of two devices is permitted to connect to DCS-1000 to utilize the
output trigger function.
Please refer to appendix for detailed information.
Note 2:
Administrator has the authority to allow user’s the permission to set the output
trigger functions through the setting in the “Users” of System Administration
menu bar.
Click on “Home” to
return to Home Screen
Camera Name*
Location**