Ping your ip address – D-Link DCS-1000 User Manual
Page 66
65
PING Your IP Address
The PING (Packet Internet Groper) command can determine whether a
specific IP address is accessible by sending a packet to the specific address
and waiting for a reply. It can also provide a very useful tool to confirm if the
IP address conflicts with DCS-1000 over the network.
Follow the step-by-step procedure below to utilize the PING command but
first you must disconnect DCS-1000 from the network.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the DCS-1000.
The succeeding replies as illustrated below will provide useful explanation to
the cause of the problem with DCS-1000 IP address.