D-Link DCS-1000 User Manual

Page 29

Camera Name* - The Camera name will be display when the Camera Name
field is entered in the Web Configuration setting under “System”
Location**- The location of DCS-1000W will be displayed when the
Location field is entered in the Web Configuration settings under “System”.

Note:
Please refer to the appendix on how to install ActiveX.

1. Install to the Web Server
2. Install to your Local PC

In the View Image – ActiveX Mode you are allowed two output trigger
options. Just click on the desired selection “ON” or “OFF” to utilize the
options for each of the output triggers (Output 1 trigger or Output 2 trigger).

Note 1:
Output trigger will send a 5V signal to the device connected to the DCS-1000.
A maximum of two devices is permitted to connect to DCS-1000 to utilize the
output trigger function. Please refer to appendix for detailed information.

Note 2:
Administrator has the authority to allow user’s the permission to set the output
trigger functions through the setting in the “Users” of System Administration
menu bar.