D-Link DCS-1000 - Manual (Page 12)

11
Software Installation
This section describes the Software installation procedure of DCS-1000 for
Web Configuration and IPView Application.
Web Configuration
•
DCS-1000 must be configured through its built-in Web-based
Configuration.
Extensive knowledge of LAN will be helpful in setting up DCS-1000
From the web browser enter the default IP address to access the Home screen
of DCS-1000 to configure your DCS-1000 type “http ://192.168.0.20” in the
address box. The number is the default IP address of your DCS-1000. Press
Enter
.
Note:
The PC’s IP address must correspond with the DCS-1000’s IP address in the
same segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two
devices to communicate.