BUG-O Systems Modular Drive System - Manual (Page 43)

43
HI-FLEX RAIL
The FMD Hi-Flex Rail can flex from a straight to a 30" (760 mm) radius inside or outside. The rail is made
from a tempered, wear resistant, stainless steel with a steel rack. It is designed for use with the FMD Hi-Flex
Carriage. The rail comes in 57.7" (1.47 m) lengths and can be held in place with magnets or vacuum cups.
An optional stiffener can be installed behind the rail for heavy duty, straight line applications.
FMD-1050 Hi-Flex Rail
Without Magnet
Assemblies
R 30"
(760 mm)
R 30"
(760 mm)
FMD Hi-Flex Rail can
flex inside or outside
to a minimum radius
of 30" (760 mm).
3.995"
(102 mm)
.080"
(2 mm) .250"
(6.4 mm)
57.722" (1.47 m) Actual Length
FMD-2155 Hi-Flex Rail
with 8 Permanent magnets
FMD-2170 Hi-Flex Rail
with 8 Rare Earth On/Off magnets
ITEM QTY PART NO. DESCRIPTION
1 4 FAS-0376 Hex Hd Cap Scr 5/16-18 x 5/8"
2 4 FAS-1370 Hex Nut 5/16-18
3 196 FAS-1444 Phil Pan Hd Scr 10-32 x 3/8"
4 1 FMD-1051 Track 5' 17-4 Stainless .077
5 98 FMD-1052 Rack Section, 3 Teeth
6 1 FMD-1053 Flex Rail Splice Plate
7 4 WAS-0250 5/16 Sae Washer
1
6
2
4 3
7
5