BUG-O Systems Modular Drive System - Manual (Page 18)

18
MDS-1005 WEAVER CONTROL MODULE
The MDS-1005 Weaver Control Module provides weave welding control functions.
TRACTOR SPEED
CONTROL
MODE SELECTOR
SWITCH
START/STOP
DWELL LEFT
STEERING
CONTROL
WEAVE SPEED
DIGITAL
READOUT
WEAVE
AMPLITUDE
DWELL RIGHT
CARRIAGE TRAVEL
SWITCH
WELD CONTACT
MDS-1005 WEAVE
MODULE
MDS-1005-DIAL WEAVER CONTROL MODULE
TRACTOR SPEED
CONTROL
MODE SELECTOR
SWITCH
START/STOP
DWELL LEFT
STEERING
CONTROL
WEAVE SPEED
DIGITAL
READOUT
WEAVE
AMPLITUDE
DWELL RIGHT
CARRIAGE TRAVEL
SWITCH
WELD CONTACT
WEAVER CONTROL MODULES
The MDS-1005 Dial Weaver Control Module provides weave welding control functions with 3 turn digital dial
pots for the weave speed, weave amplitude, dwell left and right. The addition of the dial pots allows for pre-
cise and repeatable setting of all parameters. The dial pots also enable repeatable parameter settings from
machine to machine. All dials vary from 0-300 which corresponds to the setting the parameter from 0 to its
MAX value. For example, a 300 setting for weave amplitude corresponds to 2" of weave amplitude which is
its max value. The DIGITAL READOUT provided for the tractor speed displays in either inches per minute or
centimeters per minute directly.