Safety – BUG-O Systems Modular Drive System User Manual
Page 2

2
SAFETY
PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR DEATH.
KEEP CHILDREN AWAY. BE SURE THAT ALL INSTALLATION, OPERATION,
MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY BY
QUALIFIED INDIVIDUALS.
EQUIPMENT DAMAGE
POSSIBLE.
ELECTRIC SHOCK can kill.
1) The equipment is not waterproof.
Using the unit in a wet environ-
ment may result in serious injury.
Do not touch equipment when wet
or standing in a wet location.
2) The unused connectors have
power on them. Always keep the
unused connectors covered with
the supplied protective panels.
Operation of the machine without
the protective panels may result in
injury.
3) Never open the equipment without
first unplugging the power cord or
serious injury may result.
4) Verify the customer-supplied power
connections are made in accordance
with all applicable local and national
electrical safety codes. If none exist,
use International Electric Code (IEC)
950.
5) Never remove or bypass the equip-
ment power cord ground. Verify the
equipment is grounded in accor-
dance with all applicable local and
national electrical safety codes. If
none exist, use International Electric
Code (IEC) 950.
READ INSTRUCTIONS.
Read the instruction manual before
installing and using the equipment.
1) Do not plug in the power cord without
first verifying the equipment is OFF
and the cord input voltage is the same
as required by the machine or serious
damage may result.
2) Always verity both the pinion and
wheels are fully engaged before apply-
ing power or equipment damage may
occur.
3) Do not leave the equipment
unattended.
4) Remove from the work site and store in
a safe location when not in use.
1) Never try to stop the pinion from mov-
ing except by removing power or by
using the STOP control.
2) Do not remove any protective panels,
covers or guards and operate equip-
ment.
MOVING PARTS can
cause serious injury.
FALLING EQUIPMENT
can cause serious
personal injury and
equipment damage.
Faulty or careless user installation is
possible. As a result, never stand or
walk underneath equipment.