Bronkhorst E-8000 - Manual (Page 28)

Bronkhorst High-Tech B.V.
E-8000 9.17.076 28
When entering the alarm setpoint settings screen the setpoint
change parameter is selected. Press
to enter the edit
mode.
In the edit mode, use and to select 'yes' or 'no'. Press
to confirm your selection and to exit the edit mode.
Press to exit the edit mode without changes.
In the alarm setpoint settings screen press to select the
setpoint parameter. Press
to enter the edit mode.
In the edit mode, use and to change each character.
Press to select the next character.
Press to exit the edit mode without changes.
When the final character is changed, press to confirm and
to exit the edit mode.
3.2.20 Setup menu
To enter the setup screen, select the setup item from the
settings menu and press
. Via the setup menu you can:
menu item description
info information about connected instr.
customize customize display information
display customize display appearance
bus change bus settings when connected
to a bus system